Publicidad
Idiomas disponibles
Idiomas disponibles
Enter programming mode and
change day of the week
Confirm and select
saving mode
Allows to switch between
manual, auto and OFF mode
Time zone (Auto mode)
* Some of the functions or responses may change depending on the configuration parameters.
KEYBOARD
EVENT
ACTION
Without being linked to APP Simon
iO or to other Z-Wave network.
Not pressed
Linked to APP Simon 100 iO or to
a Z-Wave network.
Thermostat in manual or
Press
Pressed key
automatic mode. No Link to APP
key
Simon 100
P1
Setting some parameter, time
Press
setting or changing mode
key P2
Press key
P3
Press key
Short press
Thermostat ON
P4
t <2s
Short press
Press
Thermostat ON
key P5
t<2s
Thermostat OFF
Long press
Press
P5 2s<t<10s
Thermostat in Manual or Automatic
key P5
mode
6
PROGRAMMING WITHOUT SIMON iO APP
P1
P2
P3
Day of the week
Clock
Setting
Current Tep
Indoor Tep
Man
Off
Auto
KEYBOARD USES AND ANSWERS
SYSTEM STATUS
FEEDBACK
Network indicator flashes.
The display shows the status of the device
with the intensity defined in parameter 13.
Hour parameters flash.
The window of available modes appears with the
mode in which the thermostat will be working
The SetPoint goes into intermittent mode
The SetPoint goes into intermittent mode
Network indicator performs slow flashing.
It allows changing the temperature
setpoint and modifying setpoints
P4
and schedules in programming
mode
It allows changing the temperature
setpoint and modifying setpoints
P5
and schedules in programming
mode
Hour
Temp Unit
Keypad Lock
Output
Network indicator
Vacation mode
SYSTEM ACTION
Time schedules are managed by
changing day with each press of P1.
The changes made are accepted.
With each press of P3 the working
mode of the device is changed
The Setpoint incremented
The Setpoint is decremented
Include / associate or remove from the
Z-Wave network
Upon release, a Node Info is sent and
the thermostat initiates an inclusion
maneuver to a Z-Wave network.
Publicidad
