Xiaomi Mi LYWSDCGQ/01ZM Manual De Instrucciones página 2

Instructions (English)
Remove the battery cover and install the battery, then turn on Mi Temperature and Humidity Monitor.
Apply adhesive to the wall surface in a suitable position, and set the temperature and humidity monitor on top of the adhesive and
press firmly into place. You can rotate the temperature and humidity monitor to adjust the angle.
This product works with Mi Home / Xiaomi Home app *. Control your device, and interact it and other smart home devices with Mi
Home / Xiaomi Home app.
Scan the QR code to download and install the app. You will be directed to the connection setup page if the app is installed already. Or
search "Mi Home / Xiaomi Home" in the App Store to download and install it.
Open Mi Home / Xiaomi Home app, tap "+" on the upper right, and then follow prompts to add your device.
Note: The version of the app might have been updated, please follow the instructions based on the current app version.
* The app is referred to as Xiaomi Home app in Europe
(except for Russia). The name of the app displayed on your device should be taken as the default.
Specifications
Model: LYWSDCGQ/01ZM
Temperature range: -9.9°C ~ 60°C
Humidity range: 0 ~ 99.9%
Dimensions: 60.8 × 60.8 × 20 mm
Net weight: 36 g
Adhesive dimensions: 52.9 × 52.9 × 7.3 mm
Adhesive weight: 7 g
Screen size: 1.78 inches
Rated power: 0.18 mW
Battery: AAA × 1
As a Xiaomi consumer, you benefit under certain conditions from additional warranties. Xiaomi offers specific consumer
warranty benefits which are in addition to, and not instead of, any legal warranties provided by your national consumer law. The
duration and conditions related to the legal warranties are provided by respective local laws. For more information about the
consumer warranty benefits, please refer to Xiaomi's official website https://www.mi.com/en/service/war-ranty/. Except as
prohibited by laws or otherwise promised by Xiaomi, the after-sales services shall be limited to the country or region of the
original purchase. Under the consumer warranty, to the fullest extent permitted by law, Xiaomi will, at its discretion, repair,
replace or refund your product. Normal wear and tear, force majeure, abuse or damage caused by the user's negligence or fault
are not warranted. The contact person for the after-sale service may be any person in Xiaomi's authorized service network,
Xiaomi's authorized distributors or the final vendor who sold the products to you. If in doubt please contact the relevant person
as Xiaomi may identify.
The present warranties do not apply in Hong Kong and Taiwan.
Products which were not duly imported and/or were not duly manufactured by Xiaomi and/or were not duly acquired from
Xiaomi or a Xiaomi's official seller are not covered by the
present warranties. As per applicable law you may benefit from warranties from the non-official retailer who sold the product.
Therefore, Xiaomi invites you to contact the retailer from whom you purchased the product.