Identifi Cation Plate; Transforming Dx Version (Outlet Pipes FI Tted On The Right) Into Sx Version (Outlet Pipes FI Tted On The Left) - Variovac S18 Manual Tecnico

Instruction manual
4.7 Identifi cation plate
The CE identifi cation plate is assembled on the side of the connection to the piping network. This should
not be removed or damaged.
5 - Transforming DX version (outlet pipes fi tted on the right) into SX version
(outlet pipes fi tted on the left)
The vacuum cleaners are generally supplied with suction and exhaust pipes on the right side (RIGHT
version). Upon request, the system can be transformed so to have the pipe connection on the left side
(LEFT version).
To do this:
8
Type of Central
vacuum cleaner
l
0
....................................
.........................................................................
Model:
P/N:
Technical data of the electric
motor
Unscrew the screws and remove
the rear fi xing plate.
l
0
Replace the panel on
2
the oppo-site side.
Manufacturer Identifi cation
IP
S/N:
Supply IP
Article
Serial Number
1
Electrical insulation
degree
CE conformity
marking
l
0
13.10.2020 Rev:1.0.0