Supplied Parts - Honeywell Home CT230-GA Guia De Instalacion

Installation Guide
About the CT230 linked unit
The CT230 linked unit is designed to be used in a system for large floor heating applications whose
load is too high for a single conventional thermostat. The system consists of a master thermostat
and multiple CT230 linked units (see diagram on the following page). The heating area is divided
into zones of 15 A or less, each zone connected to a CT230 linked unit. The user sets the tempera-
ture and programs the heating schedule on the master thermostat.
• Each CT230 linked unit is powered by line voltage (120 VAC, 208 VAC or 240 VAC) and has its
own ground fault protection mechanism. Up to 10 CT230 linked units can be used in a given
setup.
• The master thermostat (not included) can be a TH114 or TH115 thermostat operating on
12 VDC. The master thermostat is powered by one of the CT230 linked units.

Supplied Parts

• One (1) CT230 linked unit
• Two (2) mounting screws
• Four (4) solderless connectors for copper wires
2