Insert Batteries; Getting Started - Learning Resources Time Tracker Guia Del Usuario

TIME TRACKER® VISUAL TIMER
The Time Tracker Visual Timer
way. Lighted color sections give visual cues as to the amount
of time remaining to complete a task. Each section represents
a portion of time. You can program exactly how long each of
the sections remains lit, or you can select the automatic setting
and the Time Tracker will divide the time for you. Use the
Time Tracker to time tests, practice sessions, study sessions,
experiments, phone calls, speeches, or any timed activity.

INSERT BATTERIES

You will need:
4 AAA batteries
Phillips screwdriver
1. Turn the Time Tracker
turn the screw on the battery door in a counterclockwise
direction to loosen the screw.
2. Remove the screw and open the door.
3. Pull the clear tab sticking out of the backup battery
compartment to activate backup batteries.
4. Insert the four AAA batteries, being careful to match the +
and – ends of the batteries to the diagram inside the battery
compartment.
5. Replace the battery compartment door and insert the screw.
Tighten the screw by using the Phillips screwdriver to turn
the screw in a clockwise direction until secure. Do not over-
tighten the screw.
2
helps manage time in a new
®
® over. Use the Phillips screwdriver to

GETTING STARTED

The Time Tracker has 3 modes:
CLOCK – Standard digital
clock.
TIMER – Program exactly
how long you want each
color section to stay lit.
Left
Arrow
AUTO TIMER –
Program the total
amount of time. The
color sections will
Yellow
automatically divide
Section
into 80% green, 15%
yellow, and 5% red.
Green
For example, if you
Section
program 10 minutes
as your total time, the
green section will stay
Reset
lit for 8 minutes, the
yellow section for 1
minute 30 seconds,
Adapter
and the red section for Outlet
30 seconds.
Before setting the time, please note:
1. If you do not press a button within 30 seconds, you will exit
the programming mode.
2. Press MENU at any time to go back to the previous step.
3. Once you have set the TIMER and/or Auto timer, those
times will remain programmed in the unit until you change
them. Once programmed, you can go directly to STARTING
the TIMER.
4. There are audio alerts when the timer switches from green
to yellow to red. Turn the volume all the way down to mute
the sound.
Start
Enter
Menu
Display
Screen
Right
Arrow
Red
Section
Volume
Control
Speaker
(behind)
Battery
Compartment
(underneath)
3