Installing A Memory Card (Optional); Turning The Camcorder On/Off; Resetting The Camcorder - Coby Snapp CAM3000 Manual De La Instrucción

Installing a Memory Card (optional)

Install an optional SD or SDHC memory
card for increased recording capacity.
The CAM3000 accepts memory card
capacities of up to 8GB.
1. Locate the indentation of the
card door.
2. Use the indentation to flip the
card door down.
3. Load the card as shown. Make sure
the card clicks into place.
To remove a memory card, press down on the in-
stalled card; it will spring out of the slot.

Turning the Camcorder On/Off

To turn the unit on, press and hold

To turn the unit off, press


Resetting the Camcorder

Reset the unit if it should freeze and not respond or
otherwise malfunction.
1. Remove the batteries and wait 30 seconds.
2. Replace the batteries and then turn on the unit.
Page 11
1
.
.
Getting Started
2
3