Descargar Imprimir esta página

One for All URC 1035 Manual Del Usario página 4

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 14
OPERATING MODE:
2. AC code setup
If your brand is not one of the 10 listed in the Auto Search section, checked the
included code list and locate your brand there. To test the codes listed:
-
Press and keep holding SETUP key for 2s.
-
In the CODE display, the last digit will flashes on screen.
-
Use the Left and Right keys to select a digit, and the Up and Down keys to
change it until the 4 digits match the first code in the list
-
Press the ON/OFF key to test the code
-
If your a/c unit reacts, press SETUP to store the code.
-
If not, try again with the next code in the list.
-
You can exit this mode by pressing the CANCEL button
-
Once you have found the code that works correctly, please write it down below.
AC code no.: ______________________________
3. Timer ON/OFF function
-
If your a/c unit is ON, you can set the TIMER functions to turn it OFF
half an hour to 24 hour from now (in half hour intervals)
-
If your a/c unit is OFF, you can set the TIMER functions to turn it ON
half an hour to 24 hour from now (in half hour intervals)
-
To activate the Timer, press the TIMER key repeatedly until the desired time
shows as in the example. The Timer will start if no key is pressed for 3 seconds.
-
You can cancel the TIMER by pressing the CANCEL button or by turning the a/c
unit ON or OFF.
-
When the Timer is activated, please leave the remote control pointing towards
the unit.
4
RC1035 Aircon binnenwerk.indd 4
ENGLISH
Example:
Timer: Turn On after 3hrs.
Cool mode, Temp = 25
Fan Speed = Auto,
Swing = On
C,
o
03-05-17 13:05

Publicidad

loading