Recharge Battery; Recharging The Battery - Beeper Lite Manual De Instalación Y De Utilización

RECHARGE BATTERY

To keep your EDP running smoothly, we recommend that you charge the battery after each
use. Here are some maintenance tips for your safety and help maximize the life of your
product.

1. Recharging the battery

Red LED = charging
To charge your EDP, connect the tip of the charger to the space indicated on the battery, then plug it into the mains.
Be sure to dry the product and the charging connector before connecting the charger.
The bars on the display show you the charge level of your vehicle.
The longer the battery is used, the longer the charging time can be.
The autonomy varies according to the temperature.
2. Precautions for using the charger
Please read the following instructions carefully before each use of the charger:
The charger only works with the dedicated AC adapter. Using another adapter may damage the product.
The adapter must be plugged into a normal, easily accessible household outlet.
Do not cover, expose to heat or moisture, and use in a ventilated area.
Do not put other equipment on the charger.
Do not leave the charger plugged in when you are not using it.
Do not use the charger if it is damaged.
e e ter e i e
be discarded.
Never connect and disconnect the connection terminals of the battery while the power cable is still connected to
t e i re o e t e p u ro t e out et fir t
Do not store your AC charger in low temperature areas. When it regains its normal temperature, moisture can form
inside the unit and damage the electronic circuits.
Unplug the charger during lightning storms or when unused for long periods of time to prevent damage.
Green LED = recharged
e o t i tr or er
km/h
DIS
On the display, a full gauge
= the scooter is 100%
loaded.
ot e rep ed t e ord i d
24
ed, t e tr or er ou d