Trouble Shooting Guide; Warranty & Return Policies - Ashley Signature EF19-30-2A Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TROUBLE SHOOTING GUIDE

There are no user serviceable parts inside the fireplace. If the unit appears to
malfunction, turn the unit off and unplug the unit from the wall immediately.
Please contact the store that this was purchase from with the original purchase
receipt or call1 (800) 477-2222 for service related questions or concerns.
Alteration of the fireplace will void its warranty and may cause the fireplace to
malfunction resulting in electrical shock, fire, death or serious bodily injury or
property damage.
PROBLEM
1: No power or function
2: Have flame effect, but fireplace
does not blow warm air
3: Fireplace does not work, but Power
and Fireplace switches are in the "ON"
position and thermostat is set on "99"
4: The display unit on the control
panel shows "
indicator is quick flashing indicating it
is in alarm mode.
5: Only the flame icon is present and
does not display the flame levels
(ie.L1,L2...) when the flame button is
pressed.
Warranty & Return Policies
Please refer to the included warranty card. Be sure to keep this manual and
warranty card for possible future reference.
Manufactured by Zhongshan Paite Electric Appliance Co. LTD for Ashley
Furniture Industries, Inc.
EF19-30-2A
MODEL#:
" and the function
SOLUTION
1.1: Check that unit is plugged into a standard
120V outlet.
1.2: Press power button on the control panel
2.1: Confirm temperature setting exceeds
room temperature.
2.2: Try to turn on/off fireplace button several
times to make sure it's in the "ON" position.
3.1: Turn all switches to the "OFF" position
and unplug the unit from the wall outlet for
5-10 minutes. After 5-10 minutes plug the
unit back into wall outlet, and operate as
normal.
4.1: Unplug the unit from the wall outlet for
5-10 minutes. After 5-10 minutes plug the
unit back into wall outlet, and operate as
normal
.
5.1: Press and hold the flame button for 5
seconds. Once the unit "beeps" the flame
levels should appear.
Page 12 of 12

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido