Operation; Maintenance - Ryobi PCF02 Manual Del Operador

WARNING:
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict serious injury.
WARNING:
Do not use any attachments or accessories not recom-
mended by the manufacturer of this product. The use of
attachments or accessories not recommended can result
in serious personal injury.
APPLICATIONS
You may use this product for the purposes listed below:
 General ventilation of most household spaces.
INSTALLING/REMOVING BATTERY PACK
See Figure 1, page 6.
Insert the battery pack into the battery port as shown.

Make sure the latch on the battery pack snaps into place

and the battery pack is secured in the product before
beginning operation.
Depress the latch and pull to release and remove the

battery pack.
For complete charging instructions, see the operator's man-
uals for your battery pack and charger.
WARNING:
Always remove battery pack from the tool when you are
assembling parts, making adjustments, cleaning, or when
not in use. Removing battery pack will prevent accidental
starting that could cause serious personal injury.
WARNING:
When servicing, use only identical replacement parts.
Use of any other part could create a hazard or cause
product damage.
AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.

OPERATION

MAINTENANCE

NOTE: ILLUSTRATIONS START ON PAGE 6
USING THE CLAMP FAN
See Figure 2, page 6.
 Insert the battery pack.
 To start the fan, move the low/off/high switch to the left
or right.
NOTE: For low speed, move the switch left to the LOW
( I ) position. For high speed, move the switch right to the
HIGH ( I I ) position.
 To stop the fan, place the low/off/high in the center or
OFF ( O ) position.
ADJUSTABLE HEAD
See Figure 3, page 6.
The fan head can be set in a variety of positions for better
air circulation. To adjust the fan head, make sure the base
is secure and gently pivot the head to the desired position.
TO MOUNT THE FAN
See Figure 4, page 6.
WARNING:
Only clamp the fan to a mounting surface that is 1-1/2 in.
thick or less. Clean the mounting surface and the clamp
pads before mounting the fan to prevent slipping. Ensure
the fan is securely clamped before and during operation.
Never stand directly beneath a mounted fan. Failure to
follow these instructions can create a hazard and could
result in serious personal injury.
 Squeeze the ends of the clamp to open the clamp mouth
and install the fan in a suitable location.
NOTE: Be careful not to hang the fan in such a way that
it prevents normal fan operation.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and can be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
5 – English