Celcia RH03A-P Instrucciones De Uso página 8

RH03A-P
Quartz heater
INSTALLATION
Warning : Always disconnect the mains supply before installing the heater.
Connect the three conductors of the supply cable to a connection box in respecting the
polarities as below:
Live: brown, neutral: blue, earth: green/yellow
To hang your heater on the wall :
- Take a pen and mark the space on the wall for the 4 holes of the plastic support of
the heater located on the back of the heater.
- Drill 4 holes then put 4 plastic pegs in the holes the 4 screws
- Hang the heater by inserting the 4 screws sticking out the wall into the slots of the
support.
Always be sure that the heater is correctly fixed and stable after performing the
installation !
Always respect the safety distances around the heater : 25cm minimum between the
heater and the ceiling, 1,8m minimum between the heater and the ground and 1m
minimum at each side of the heater.
USE
- To start the heater, pull once the white string of the heater: The dial indicates the 1
position (600W) Pull another time the string, the dial indicates the 2 position
(1200W).
- To stop the appliance, pull the string until the 0 postion apperear.
Always read this instruction manual before
installing or using your appliance and always
keep for future reference.
39