Hkoenig STM45 Manual De Utilización página 5

* Do not pull out or plug in the steam conduit when the
machine is still hot but only when the machine is cooled
down, thus to avoid scald.
* If the ironing brush falls, has visible damage or is leaking,
stop using it.
* To avoid scald by steam, after operation, turn off the
power supply, pull out the plug and, when the machine is
cooled down, pour out the remnant water, and then have
the machine packed and stored. However, let the machine
air dried before packing and storage. Do not pull put the
plug by dragging the power cord.
* Use dry soft cloth and neutral detergent to clean the
machine surface and do not use solvents such as
gasoline, alcohol, banana oil, etc. Prevent liquids
penetrating into the machine.
* Do not soak the machine, power cord or plug in water or
other solutions. Do not keep the machine in places which
are damp, exposed or of corrosive gases.
* Keep the machine away from flammable or explosive
objects.
* Please clean the filter sieve at regular intervals to keep it
available. The machine shall be cleaned or maintained
from time to time (every 1 month or 20L water is
consumed). (See the following sections for the cleaning
and maintenance)
* Push the support pole to move the machine. Do not
move the machine by force when it is tough to be moved.
Discharge the water before checking the wheels. Turn off
the power supply and pull out the plug before moving the
machine.