Publicidad
STEP 4 :
ATTACH FRONT FRAME (D), TO A, B, C, SECURE
THE CONNECTION BY TURNING CAM LOCK ON A,
B, AND C, HALF TURN CLOCKWISE.
THEN MAKE THE UNIT STAND UP NORMALLY.
5
STEP 6; DRAWER ASSEMBLY
INSTALL CAM BOLTS (1) INTO DRAWER FACE (J),
INSERT CAM LOCK (2) INTO LEFT/RIGHT DRAWER SIDE (G & H), INSERT BACK FIX (7) INTO DRAWER BACK
(F) WITH THE POSITION AS SHOWN.
ATTACH BOTH DRAWER SIDE (G & H) TO DRAWER FACE (J) BY SLIDING IN CAM BOLTS TO DRAWER SIDE HOLES,
THEN TURN CAM LOCK CLOCKWISE TO LOCK.
SLIDE IN DRAWER BASE (I), INTO THE GROOVES.
ATTACH DRAWER BACK (F), AND SECURE IT USING Ø 8X1” FLAT HEAD SCREW (4). TURN BACKFIX (7) 1/4 TURN
CLOCKWISE TO LOCK DRAWER BASE (I) IN PLACE.
INSTALL “Z” SHAPE DRAWER GLIDE (6) USING Ø6 X 1/2” SCREW (5) AS SHOWN.
MAKE SURE WHEEL OF RUNNER IS AT BACK OF DRAWER BOX AND
RUNNER BUTTS UP AGAINST BACK OF DRAWER BACK.
INSTALL DRAWER KNOB (8) USING BOLTS Ø4 X 25 (3)
AND WASHER (9) AS SHOWN
8
A
STEP 5 :
6
INSTALL “U” SHAPE DRAWER GLIDE (6) (L FOR LEFT
SIDE PANEL B, R FOR RIGHT SIDE PANEL C) WITH
Ø 6X1/2” FLAT HEAD SCREW (5). USE THE FIRST
HOLE BEHIND WHEEL THEN FOLLOW PILOT HOLES
FOR THE REST OF SCREWS.
3
G
6
5
B
7
F
I
D
C
4
2
H
1
J
Publicidad
