Hardware Installation - Conceptronic CTVFMi Guía De Iniciación Rápida

ENGLISH

2. Hardware installation

To install the TV/ FM Capture Card into your computer, please follow the steps
as below:
1. Turn off all your computer power sources and remove the cover of your PC.
5. Plug the TV/ FM Capture Card into any free PCI slot.
6. Connect the SVHS device to the 4 pins mini-din connector (SVHS-IN) when
available.
7. Connect the camera or any RCA composite video to the AV-IN when
available.
5. Connect the TV antenna or cable to the TV-in connector.
6. Connect the FM antenna to the FM-in connector.
7. Connect the Audio-Out to the line-in of the sound card.
8. Connect the remote sensor to the Remote-in connector.
9. Put the computer's cover back and power on.
Now go to page 22 for the rest of the installation procedure.
6