Snapper NXT22875E Manual Del Usario página 24

Specifications
Mower
Deck Size (in)
Height of Cut (in)
Transmission Type
Ground Speed (mph)
Blade Torque (ft-lbs)
Engine
Gross Engine Power * (ft-lbs)
Engine Displacement (cc)
Fuel Tank Capacity (qt)
Oil Capacity (oz)
Spark Plug Gap (in)
Spark Plug Torque (in-lbs)
* Power Ratings: The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of
Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been
obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horse-
power values are derived at 3600 RPM. The gross power curves can be viewed at www.BRIGGSandSTRATTON.COM. Net
power values are taken with exhaust and air cleaner installed whereas gross power values are collected without these attach-
ments. Actual gross engine power will be higher than net engine power and is affected by, among other things, ambient
operating conditions and engine-to-engine variability. Given the wide array of products on which engines are placed, the gas
engine may not develop the rated gross power when used in a given piece of power equipment. This difference is due to a
variety of factors including, but not limited to, the variety of engine components (air cleaner, exhaust, charging, cooling, car-
buretor, fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-
to-engine variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher
rated power for this Series engine.
22
1.25 - 4
Variable Speed/Gear
0 - 4.2
40
8.75
190
1.2
18 - 20
0.020
180
1-800-317-7833
www.snapper.com