Publicidad
Idiomas disponibles
Idiomas disponibles
Before beginning work on the vehicle, ensure that the axle stands and vehicle are stable.
Always use 2 axle stands for a vehicle, never more than 2.
Never use the jack on a vehicle that is already on the axle stands.
Never use the axles stands for 3-wheeled vehicles or for trailers.
m
DANGER! Never exceed the maximum load for each pair of axle stands (2000 kg
per axle stand). Excess load may damage the axle stands or destroy them
completely. Always position the load in the middle of the ramp! Unless you are
lifting the car, always use the axle stands 2 at a time on a level surface which is
able to take the weight. Using the axle stands on a surface which cannot take
the weight may lead to uneven weight distribution and possible complete loss of
load-bearing capacity. Do not use on gravel. Non-observance of these instructions
may cause damage of the axle stands, loss of the load and therefore to property
damage, severe personal injury or a fatal accident.
Use this product only with the components described in the instructions and use it only for the intended
use.
Support the raised weight immediately with the axle stands.
˜ Scope of delivery
x 2
˜ Assembly instructions
1
2
x 2
3
4
GB/MT
19
Publicidad
