Eco MODINE IDE Serie Manual Tecnico página 17

Electric heater connection schemes and electric power
Model with ø 560 mm fan motor
IDE model ø 560 52A04
52A07
52A10
Total power (W) 16050
Model with ø 560 mm fan motor
IDE model ø 560 52B04
52B07
52B10
Total power (W) 19260
400V/3/50 Hz connection
(preset) .
230V/3/50 Hz connection
Obtainable by modifying the jumper layout in the terminal block .
53A04 54A04
53A07 54A07
RBA1 / RBA2 / RBA3 / RBA4 - High power electric heaters in coil .
RBB1 / RBB2 - Low power electric heaters in coil .
53A10 54A10
RSB1 / RSB2 - Low power electric heaters on drip tray .
24000 32250
RBM1 / RBM2 - Medium power electric heaters in coil .
400V/3/50 Hz connection
(preset) .
230V/3/50 Hz connection
Obtainable by modifying the jumper layout in the terminal block .
53B04 54B04
53B07 54B07
RBA1 / RBA2 / RBA3 / RBA4 / RBA5 / RBA6 - High power electric heaters
53B10 54B10 in coil .
RBB1 / RBB2 / RBB3 / RBB4 - Low power electric heaters in coil .
28800 38700
RSB1 / RSB2 - Low power electric heaters on drip tray .
Caution
Application of adequate thermal
control systems on feeder lines
is mandatory .
Performance of all electric heat-
ers must be periodically con-
trolled to avoid damage due to
ice build-up . The manufactur-
er is not liable in any way for
defects caused by non detected
malfunctions .
Caution
Application of adequate thermal
control systems on feeder lines
is mandatory .
Performance of all electric heat-
ers must be periodically con-
trolled to avoid damage due to
ice build-up . The manufactur-
er is not liable in any way for
defects caused by non detected
malfunctions .
15
www.modinecoolers.com