1. Remove the Hunter® Evaporative Humidifier from its packaging.
2. place the humidifier on a hard, flat, water resistant surface. always place the humidifier at least
six (6) inches away from walls and sources of heat.
3. Make sure the power/Speed Control is in the 'oFF' position. NoTE: The power/Speed Control should
always be off before unplugging the humidifier, moving the humidifier, or refilling the water tank.
See Figure 2.
4. Lift the Main Housing to ensure the Wick is properly seated, resting on the bottom of the base and
not tilted or otherwise out of position. See Figure 3. place the Main Housing back on the Base.
43001-01 04/27/2007
using Your Humidifier
Wick, properly
seated
power/Speed Control
Figure 2
Figure 3
4
© 2007 Hunter Fan Co.