First Use - Spanset 1492-2 Borrador De Las Instrucciones

For shortening, the round slings can be laid around a crane
hook .
19
When lifting sharp-edged loads, protect round slings/round sling
hangers with safety tubes (e.g. secutex safety tubes or NoCut
For net weight of 25 kg and above, ergonomic handling of
round slings/round sling hangers requires technical equipment,
such as pulleys.
Note that UV radiation (sunlight) may impair the properties of
the sling.
Use round slings so that the latter may be removed without
damage after the lifting process.
3 Operating round slings/round sling hangers

3.1 First use

Before first use, the user must inspect the round slings/round sling
hangers for compliance with the order, completeness of accompanying
documents (e.g. declaration of conformity and manufacturer certificate)
and conformance of the data in the accompanying documents with the
product labels. Upon first use, an authorized person must make a visual
check and document it according to BGR 500. For this, a chart can be
created or an inspection card filled out and saved. Equipping products with
RFID tags and electronic documentation of commissioning, such as with
IDXpert (database), speeds up and simplifies the routine described.
®
3.2 Choosing the right round slings/round sling hangers
Determine the load's weight by weighing or calculation! Find out
the position of the load's centre of gravity from design documents or
calculate it! The crane hook must be positioned perpendicularly to the
load's centre of gravity, and the length and angle of the round slings
must be determined.
Page
EN
16
).
®