INSTALLATION INSTRUCTIONS
4. If you need to adjust the doors, do so in the following manner:
To adjust door up or down, loosen screws (a) on both hinges, adjust door, and retighten screws.
To adjust door left or right, turn screws (b) on both hinges, in or out.
To adjust door in or out, loosen screws (c) on both hinges, adjust door, and retighten screws.
4
c a
5. To remove drawer preassembled in vanity (A),
c a
extend the drawer out halfway, then pull drawer
firmly straight out. While pulling, try to keep
drawer level (to ground) and centered left to
right.
Note: Drawer glides do not need to be
disengaged prior to removal. If drawer does not
come out, repeat pulling more firmly.
2
2
2
2
c a
c a
b b
5
b b
5
2
2
1
c
1
c
c
B
Mounting
holes
A
B
Mounting
holes
A
2
2
c