Disassembling
1
Oil tray
Hold the oil tray at its both ends and
slide forward.
NOTE:
The tray may be filled with oil, so be
careful when removing it.
2
Rectifier panel
Loosen the mounting screws attaching
the rectifier panel, pull the rectifier
panel forward slightly to free the
mounting screws from the mounting
guide holes and the body catches.
NOTE:
Use a screwdriver if they are tight.
3
Filter
First, remove one knob fixing the
filter, then slide it t o the arrow
direction to disengage from the
catches.
Cleaning
1
Filter and oil tray
After immersing the filter and oil tray in
water with a mild detergent for 30 to 40
minutes, wash them with a toothbrush or
the like to remove dirt.
Clean the filter frequently to avoid
grease contamination and grease build-
up, which is difficult to clean.
2
Rectifier panel
Wash the rectifier panel in tepid water with
a mild dissolved detergent. After washing,
wipe it off thoroughly with a dry cloth.
Mounting screw
Knob
Catch
Catch
7