V-TAC VT-5122 Instrucciones De Instalación página 8

ADDING CAMERA DEVICE TO THE APP
TIP: First, connect power to the device, then the device will sound "Camera
start -> wait for connection" then you can start to operate on APP to start
adding device. If you do not hear "wait for connection", press the "RESET"
button in the device to reset and try again.
Add Camera
•
Add camera Tap on top right corner "+" sign as shown below (figure 4)
•
Tap on "Intelligent Camera" as shown below(Figure 5)
•
There are three ways for adding the camera: (a) Device adding by scan-
ning code (b) Addition of AP hotspot (c) Addition by connecting to network
cable(This feature is not available for this camera) (Refer to Figure 6)
FIGURE 4 FIGURE 5
7
ENGLISH
FIGURE 6