Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Thank you for purchasing a Hubert® Digital Thermometer. Please read this instruction manual carefully before use.
Keep these instructions handy for future reference.
1. Some models have a static cling label on the lens to prevent scratching. Please remove before use.
2. The thermometer operates on one CR1225 3 Volt lithium battery (installed). To replace the battery:
● Open the battery compartment by turning the cover on the back of the thermometer counterclockwise, using a
coin in the slot. Be sure the arrow on the battery cover points to the open lock symbol. Remove battery cover.
● Remove used battery and insert new one, with the "+" sign facing up.
● Replace the battery cover so that the arrow points to the open lock symbol. Then use a coin to turn the battery
cover so the arrow points to the closed lock symbol. Note: If the battery cover is not closed properly, water can get
into the battery compartment causing the unit to malfunction.
● Change the battery when the display becomes dim.
NOTE: Electrostatic interference may affect first use of the thermometer. If the thermometer does not initially work,
remove the battery and reinstall it.
NOTE: please recycle or dispose of batteries per local regulations.
WARNING: Batteries may pose a choking hazard. As with all small items, do not let children handle batteries. If
swallowed, seek medical attention immediately.
PRECAUTION: Do not dispose of batteries in fire. Batteries may explode or leak. Remove the battery if the unit will
not be used for a long period of time.
1. Press ON/OFF to turn the unit on. Press and hold ON/OFF to turn the unit off. (Auto-off feature: The unit will turn
off to conserve battery power after 5 minutes of non-use or if there is no change in temperature and the temperature
reading is lower than 122°F (50°C)).
2. Press °F/°C to switch between Fahrenheit or Celsius temperature readings.
3. Hold Function: The HOLD function "freezes" the current temperature reading on the display so the thermometer
can be removed from the food and still show the reading. Press HOLD/▼ to hold the temperature display ("HOLD"
will appear). Press again to release.
4. Min/Max Function: Press MAX/▲ to get the highest (maximum) temperature reading. ("MAX" will appear.) Press
again to get the lowest (minimum) temperature reading. ("MIN" will appear.) Press again to release. To clear the
max/min memory, remove the battery for 1 minute and then replace it.
5. Recalibration Function: Press and hold SET. ("SET" will appear). Then press MAX/▲ and HOLD/▼ at the same
time. The temperature display blinks. Suspend probe at least 1" into a 'slush' of crushed ice and water (32°F / 0°C)
for at least 30 seconds. (Keep the probe from touching the container bottom.) Press MAX/▲ or HOLD/▼ to set the
calibration back to 32ºF/0ºC. Press and hold SET to confirm calibration ("---" and "OK" will appear). Calibration is
complete.
NOTE: If no buttons are pressed for 30 seconds, the unit will automatically return to normal mode. To restore the
default calibration temperature, remove the battery for 1 minute and replace it.
70741
Digital Thermometer
Instruction Manual
First Use and Battery Information
Functions

Publicidad

loading

Resumen de contenidos para Hubert 70741

  • Página 1 70741 Digital Thermometer Instruction Manual Thank you for purchasing a Hubert® Digital Thermometer. Please read this instruction manual carefully before use. Keep these instructions handy for future reference. First Use and Battery Information 1. Some models have a static cling label on the lens to prevent scratching. Please remove before use.
  • Página 2 There are no express warranties except as listed above. This warranty gives you specific legal rights, and you may have other rights which vary from state to state. © 2014 Hubert® LLC and its affiliated companies, all rights reserved. Hubert® is a registered trademark of Hubert® LLC and its affiliated companies. All rights reserved.
  • Página 3: Les Relevés De Température

    Thermomètre numérique Manuel d'instructions Merci de votre achat d'un thermomètre numérique Hubert®. Veuillez lire attentivement ce manuel d'instructions avant d'utiliser votre produit. Conservez ces instructions à portée de la main à titre de référence. Information sur la première utilisation et la pile 1.
  • Página 4 à l'autre. ©2014 Hubert® LLC et ses sociétés affiliées, tous droits réservés. Hubert® est une marque de commerce déposée de Hubert® LLC et ses sociétés affiliées. Tous droits réservés.
  • Página 5: Las Lecturas De La Temperatura

    Termómetro digital Manual de instrucciones Gracias por comprar un Termómetro digital Hubert®. Antes de utilizarla lea este manual de instrucciones cuidadosamente. Guarde estas instrucciones en un lugar de fácil acceso para referencia futura. Información del primer uso y la batería 1.
  • Página 6: Cuidado Y Precauciones

    ©2014 Hubert® LLC y sus compañías afiliadas, todos los derechos reservados. Hubert® es una marca registrada de Hubert® LLC y sus compañías afiliadas. Todos los derechos reservados.
  • Página 7 Digitalthermometer Bedienungsanleitung 70741 Wir danken Ihnen für den Kauf eines Hubert® Thermometers. Bitte lessen Sie diese Bedienungsanleitung vor Gebrauch sorgfältig durch. Bewahren Sie die Anleitung zur zukünftigen Bezugnahme griffbereit auf. Erstmaligen Verwendung und Batterie-Information 1. Bei einigen Modellen befindet sich eine statische Adhäsionsfolie auf dem Display, um Kratzer zu vermeiden. Die Folie vor dem Gebrauch entfernen.
  • Página 8 Ansprüche, und Sie haben u.U. weitere Rechte, die von Staat zu Staat verschieden sind. ©2014 Hubert® GmbH und seine angeschlossenen Firmen, alle Rechte vorbehalten. Hubert® ist ein geschütztes Warenzeichen der Hubert® GmbH und seiner angeschlossenen Firmen. Alle Rechte vorbehalten.