Appendix (English); Technical Specifications - LTO TS208 Guía Del Usario

Appendix (English)

Technical Specifications

Specifications are subject to change without notice.
TS208
Output Power
Low Frequency
High Frequency
Crossover
Maximum SPL
Frequency Response
Frequency Range
Coverage
Connectors
Cabinet
Controls
Protection
Power
Dimensions
(width x depth x height)
Weight
TS210
Output Power
Low Frequency
High Frequency
Crossover
Maximum SPL
Frequency Response
Frequency Range
Coverage
1100 W peak (700 LF + 400 HF)
550 W continuous RMS (350 LF + 200 HF)
8" (203 mm) woofer, 2" (51 mm) voice coil
1" (25 mm) exit with 1" (25 mm) neodymium compression driver
2.5 kHz
123 dB peak, 120 dB continuous (dB-SPL @ 1 m)
62 Hz – 20 kHz (+ 3 dB)
52 Hz – 22 kHz (-10 dB)
90° H x 60° V
(2) 1/4" (6.35 mm) TRS or XLR inputs
(1) XLR link output
Trapezoidal, injection-molded, polypropylene enclosure, with
perforated steel grille
Volume, power on/off with LED, clip limiter with LED, ground lift
Electronic clip, thermal and transducer overdrive protection
AC Input: 100–120/220–240 V, 50/60 Hz
Fuse: 100–120 V T6.3AL AC250V / 220–240 V T3.15AL AC250V
10.3" x 9.6" x 17.2"
261 x 244 x 437 mm
17.6 lbs.
8.0 kg
1100 W peak (700 LF + 400 HF)
550 W continuous RMS (350 LF + 200 HF)
10" (254 mm) woofer, 2" (51 mm) voice coil
1" (25 mm) exit with 1" (25 mm) neodymium compression driver
2.5 kHz
125 dB peak, 122 dB continuous (dB-SPL @ 1 m)
54 Hz – 20 kHz (+ 3 dB)
48 Hz – 22 kHz (-10 dB)
90° H x 60° V
21