Defy Microderm Treatment Manual De Instrucciones página 5

the device across the skin. As you become more familiar with the
device, you can increase the pressure and/or number of passes
according to your needs. Be careful not to apply too much pressure
though. Flaky dead skin may appear on the surface of the skin you
treat. Pinkness of the skin is normal because of the professional
quality of this treatment.
steP 4: device clean uP
1. Rinse the filter (which keeps the dead skin cells from being sucked
into the vacuum) thoroughly under warm running water.
2. Do not get water in the vacuum. It is important to clean this filter
every time you use the device—if you don't, dead skin cells will
clog the vacuum and the device will stop working properly.
3. Let the filter dry completely before putting the device away.
4. Use a soft cloth or tissue to wipe any residue out of the cap and
motor shaft.
steP 5: skin cleanse
Wipe or rinse any dead skin off your face. Apply Defy Triple Action
Toner to better prepare skin for Defy treatment products.
steP 6: facial care Products
Apply your other Defy facial care products as usual. Be sure to wear
sunscreen during the day and avoid excessive sun exposure for 3-4
days following the treatment.
3