Troubleshooting Guide - Braun CareStyle 5 Pro IS 5055 Manual Del Usuario

Trouble shooting guide
PROBLEM
The appliance does not switch on.
Steam comes out under the ironing
system.
There are some water drops from the
holes in the bottom of the sole plate.
Brown coloured fluid leaks from the sole
plate.
The first time the appliance is turned on,
you notice smoke or smell.
The appliance emits an intermittent
noise associated with vibrations.
The appliance emits a continuous
noise associated with vibrations.
The cleaning valve is difficult to unscrew Limescale has made the cleaning valve
After refilling water, the icon
reset.
All LEDs are blinking
Subject to change without notice.
Please do not dispose the product in the
household waste at the end of its useful life.
Disposal can take place at a Braun Service
Centre or at appropriate collection points
provided in your country
CAUSE
The appliance is not plugged into a
mains socket.
The "max" pressure safety system has
opened.
Water has condensed inside the tubes
because steam is being used for the
first time, or has not been used for
some time.
Chemical water softeners or additives
have been poured into the water tank or
steam generator.
Some parts have been treated with
sealer/lubricant which evaporates the
first time the iron heats up.
Water is being pumped into the steam
generator.
difficult to open
The water float doesn't work
does not
appropriately
System error
REMEDY
Make sure the appliance is correctly
connected and press the on/off button.
Turn the appliance off immediately and
contact an authorised Braun Customer
Services
Press the steam button several times
away from the ironing board. This will
eliminate cold water from the steam
circuit.
Never pour products into the water
tank. Clean the sole plate with a damp
cloth.
This is normal and will stop when you
have used the iron a few times. If the
smell is still present after turning off the
appliance, contact an authorised Braun
Customer Service.
This is completely normal
Unplug the system from the mains and
contact an authorised Braun Customer
Services.
Turn the cap forcefully. To avoid the
problem, rinse the the system
frequently
Empty the water tank, rinse out and
refill.
Unplug the system, plug it in again and
press the on/off button. If this problem
is still present, turn the appliance off
immediately and contact an authorised
Braun Customer Service.
11