Special Programs - Fulgor Milano FCLHD 8041 HID TS BK Instrucciones Para La Instalación Y Uso

liquids (e.g. water to cook pasta) or food in a
very short time.
To activate this program slide to the far right
on the slidebar until the «P» symbol appears
on the cooking zone display.
• AUTOMATIC WARM-UP «A»
All cooking zones are equipped with an
"automatic warm up" function. This feature
sets the cooking zone to the highest heat
level for a certain period of time and then
automatically switches back to the cooking
setting that was originally set.
The lenght of time that the automatic warm
up function operates depends on the heat
setting selected.
To activate the "automatic warm up" function
on a cooking zone place your finger on the
slidebar at the desired heat level an hold
the position for 3 seconds until the symbol
«A», alternating with the selected heat level,
appears on the cooking area display.

• SPECIAL PROGRAMS

The cooktop has three special programs that
have already been set to perform special
cooking operations.
- Warming
The ''Warming'' program sets the heat
temperature of the selected cooking zone
at 42°C to keep food warm. To activate this
program press the Special programmes
key once. The Warming led lights up
besides the cooking zone display.
- Melt
The ''Melt'' program sets the heat
temperature of the selected cooking zone
at 70°C to melt chocolate, butter or the
like. To activate this program press the
Programs key twice. The Melt led lights
up besides the cooking zone display.
- Simmer
The ''Simmer'' program sets the heat
temperature of the selected cooking zone
at 94°C to bring to a boil slowly preparing
sauces or soups and stews. To activate
this program press three times the
Programs key, the Simmer led lights up
besides the cooking zone display.
• TIMER
This function allows you to set the time from
«1.00» (1 minute) to «1.59» (1 hour and 59
minutes) for the automatic switch off of a
cooking zone.
Switch on a cooking zone by sliding on the
slidebar to adjust the heat level. To activate
the timer press simultaneously the [+] and [-]
keys on the timer area until the clock symbol
lights up beside the cooking zone display,
then set the desired time using the timer [+]
and [-] keys within 5 seconds. Wait for 5
seconds for the automatic confirmation. The
time countdown will be start on the timer
display.
When time elapses the cooking zone will
automatically switch off, the timer display
will show a flashing «000» and an acoustic
signal will be heard. Press the [+] or [-] key
on the timer area to stop the signals.
To disable the timer of a cooking zone press
repeatedly and simoultaneously the [+] and
[-] keys on the timer area until the clock
symbol lights up beside the display of the
desired cooking zone, press again the timer
[+] and [-] keys simoultaneously, then bring
the timer value back to «000» by using the
timer [-] key. Wait for 5 seconds for the
automatic confirmation.The clock symbol
beside the cooking zone display goes off.
• EGG TIMER/REMINDER
When no cooking zone is active it is possible
to set an acoustic reminder which stays
active after switching the appliance off. When
the Egg timer/Reminder function is active,
the Timer function cannot be selected.
To enable this function press simoultaneously
the timer [+] and [-] keys. The clock symbol
lights up below the timer display. Set the time,
ranging from «1.00» (1 minute) to «1.59»
(1 hour and 59 minutes), by pressing the
17