Assembly Instructions - Weston 83-2014-W Manual Del Usuario

ASSEMBLY INSTRUCTIONS

w WARNING Cut Hazard. Blades are sharp, use care when handling. The
use of cut-resistant gloves is suggested.
1. Place the two Push Rods into the bottom of
the Base. FIGURE 1
2. Place the Container onto the Base and the
Push Rods. FIGURE 2
3. Choose the Blade to be used. Place the Blade
onto the opening of the Container (FIGURE 3).
The rounded tabs on the Blade will fit into the
curved slots on the Container.
4. Insert the Push Plate that corresponds with
the Blade chosen into the slot of the Pusher.
FIGURE 4
5. Put Pusher onto the Container so that hollow
columns of the Pusher fit over the Push Rods.
FIGURE 4
6. Assembly is complete. FIGURE 5
FIGURE 5
FIGURE 1
FIGURE 2
FIGURE 3
FIGURE 4
5