Using the device
3. Starting
up the
vehicle.
1
jump lead
bank
within 30 seconds and disconnect firstly the
1
black battery clamp and then the red clamp from the
battery poles. Otherwise, it could result in dangerous
situations!
Leave the vehicle engine running.
Note: The button on the LED box
has no effect and must not be used. It is only used for
troubleshooting purposes during the manufacture of the
device.
z Charging mobile phones and tablets
Press the power switch
Connect your mobile phone or tablet's USB power cable
to the USB output (5 V
your mobile phone or tablet.
114
GB/MT
B
2.
As soon as the vehicle starts, remove the
from the portable jump starter with power
10
7
A
1.
of the jump lead
11
.
/1 A
/2 A
5
) and then to
6