Locating A Specific Track - Sony MDS-S38 Manual De Instrucciones

Playing MDs
Checking remaining time and the title of a
track
Each time you press DISPLAY/CHAR (or DISPLAY)
while playing an MD, you can change the display as
shown below. The track numbers in the music
calendar disappear after they are played.
Track number and playing time of the
current track
Track number and remaining time of
the current track
Track name
Press
If no title is recorded, "No Name" appears,
followed by the elapsed playing time.
You can check the track name at any time while
playing an MD
Press SCROLL.
Since the display shows up to 12 characters at a time,
press SCROLL again to see the rest of the track title if
the title has 13 characters or more.
Press SCROLL again to pause scrolling, and again to
continue scrolling.
18 EN
√
Press
√
Press

Locating a Specific Track

You can quickly locate any track while playing a disc
by using AMS (Automatic Music Sensor), = and
+, number buttons or M.SCAN on the remote.
)
§
0
fl
p r
= +
>25
= AMS +
·
=/+
To locate Do the following:
The next or During playback, turn AMS clockwise
(or press + repeatedly) until you
succeeding tracks
find the track.
During playback, turn AMS
The current or
counterclockwise (or press =
preceding tracks
repeatedly) until you find the track.
A specific track Press number buttons to enter the
directly track number.
A specific track by 1 Turn AMS until the track number
using AMS you want to locate appears while
the deck is stopped. (The track
number is flashing.)
2 Press AMS or fl.
By scanning each 1 Press M.SCAN before you start
track for 6 seconds playing.
(music scan)
2 When you find the track you want,
press · to start playing.
6
Number
buttons
M.SCAN
· P p
= + r
0 )