EN
3. Guest earbud will automatically connect with your Host
earbud, when it is on;
4. while the Host earbud shining blue twice a time
discontinuously, and the guest earbud shining green twice a
time discontinuously, it indicates they are connected
successfully.
*Note: You may have a problem to connect with the Guest
earbud while the Host earbud is busy.
Restore and Repair Instruction
(while pairing anomaly between bluetooth device & earbuds)
Step 1: Disconnect & Close
Disconnect your bluetooth device(control this progress in your
cellphones or pads);
Close your earbuds(hold the main button till the red led light shine
continuously, both earbuds will close synchronously after shining when
they connected with each other).
Step 2: Restore & Repair
Open one of the earbuds randomly(hold the main button till the blue
light shine discontinuously);
Restore the setting(press the side button till the green light shine
continuously, then the light faded and return to the blue light, restore
was done);
Close your earbud again(refer to the step 1).
Step 3: Restart & Pairing
Restart your earbud(turn to the pairing mode: hold the main button till
the blue and red light shine alternately);
Connect to your bluetooth device(control this progress in your
cellphones or pads);
Pair with the Guest earbud(Take out your another earbud, power it on,
it will connect with the first earbud automatically);
Enjoy your Truly Wireless Earbuds again!
www.smartomi.com
6