English; Introduction; For Your Safety And That Of The Ssd - Verbatim Vi560 SATA III M.2 2280 Manual Del Usuario

English

Introduction

This guide is intended as a general outline of the key steps involved in installing a Solid
State Drive (SSD) into a laptop or desktop computer, and is not intended to provide
speci c details pertaining to a particular PC hardware or Operating System (OS)
con guration. Check with your motherboard documentation to con rm that there is a
SATA III M.2 slot available and it can accept the M.2 2280 form factor. If, after reading this
outline, you do not feel con dent you can carry out the necessary steps to perform the
installation, it is highly recommended that you contact a quali ed service technician for the
installation of your SSD.
Note for those users replacing an existing Hard Disk Drive (HDD) or SSD: If you
intend to replace an existing drive on your computer with this SSD by way of cloning or
data migration, you will need to procure data cloning/migration software and complete
this process before installing the Vi560 SSD. There are many types of data
cloning/migration software available online at little or no cost to you. If you plan on cloning
your current drive onto your new SSD, a USB-to-SATA cable or adapter is also needed.
Both the software and the USB-to-SATA cable are not included with this product.
Verbatim suggests fully backing up your system before performing any hardware
or software modi cations. Verbatim is not liable for any damage caused by you
in the installation of your SSD or any 3rd party warranty voided during
installation.

For Your Safety and that of the SSD

• To reduce the risk of damage to sensitive electronics by electrostatic discharge, touch
an unpainted metal surface (such as your computer case) with your ngers before
touching the SSD to your computer.
• Ensure your working environment is clean, dry, and static-safe.
• Handle your SSD with care and do not touch the gold connectors on the end of
the SSD.
1