Taking Pictures; How To Select The Flash Mode; [Ttl Auto] - Panasonic DMW-FL220 Instrucciones De Operación

Taking Pictures

How to select the flash mode

1 Turn on the power of the digital camera.
2 Turn the mode dial on the unit to select the flash
mode.
A Mode dial
≥ The [CHARGE] lamp lights after the flash has been fully
charged.
∫
About the flash modes
Item
After measuring the appropriate flash intensity by
discharging a pre-flash, the unit fires again for

[TTL AUTO]

photo taking.
≥ [CHARGE] lamp will keep blinking until flash
recognises the digital camera.
The unit emits light in Guide Number (GN)
[MANUAL]
(ISO100 ·
¢ The guide number (GN) is a value which indicates the light
quantity of a flash.
12
VQT1U62
Details of settings
m).
≥
Please set flash mode to [MANUAL] for digital cameras without
a communication function, and use an optimum camera to
subject distance (P14) as a guide.
[TTL AUTO]
Refer to P13 about the flash working range.
1 Press the shutter button all the way down, and
take the picture.
2 Check that the [AUTO CHECK] lamp is flashing.
≥ The unit emits light in proper exposure if [AUTO CHECK] lamp
flashes for approximately 5 seconds. If it does not flash, check
the settings on the unit and the digital camera.
3 Set the mode dial to [OFF] to turn off this unit
after taking the picture.
¢
22