Chapter 4 Osd Menu Settings; Calling Up A Menu Display - Avermedia AVerLife Cinema E232 Manual Del Usario

Chapter 4

4.1 Calling Up a Menu Display

Press the HOME button on the remote control to call up and exit to the main menu display. Use ◄ or ► to
toggle between different menus. Then, you can use the ▲ or ▼ buttons to select the item in the menu list.
Then press Enter to make a selection. The table below lists the different functions you will find in the menu.
The default language is English. To choose another language, please go to Settings submenu. Then select
Language. Use the or
17.
18.
19.
BACK
20.
21.
ASPECT
22.
SUBTITLE
OSD Menu Settings
buttons to select from different languages. Then press Enter to confirm.
ENG-5
Advance the playback
Go to the next item in the playlist.
Go back to the upper menu or exit to the
menu.
Rotate the photo 90 degrees clockwise.
Switch to different aspect ratios (full screen /
16:9 mode 1 /16:9 mode 2 / 4:3 mode / keep
ratio).
Under the menu, switch between different video
signal (HD mode (60Hz), HD mode (50Hz ) /
NTSC Interlace / NTSC Progressive/ PAL
Interlace / PAL Progressive / NTSC Composite
/ PAL Composite)
AVerLife Cinema turns on automatically when the
power adaptor is plugged in. If there is no display on the
screen, try pressing HOME and then ASPECT button to
switch between different video sources.
To view the subtitle information / Change subtitle
User's Manual