Kohler K-6331 Guia De Instalacion página 3

O-Ring
Fiber
Washer
Metal
Washer
Ring
Screws
1. Install the Faucet
Insert the O-ring into the groove of the faucet base.
IMPORTANT! If you are mounting the faucet to an uneven surface
(such as tile grout lines), apply a suitable sealant in addition to the
O-ring provided. Do not use petroleum based sealant.
Partially thread the screws into the ring until they barely protrude
from the backside of the ring.
Position the faucet through the mounting surface.
Slide the fiber washer and metal washer on the shank.
Thread the ring to the threaded shank until it is about 1/4 turn
from touching the sink bottom.
Turn the ring so the screws are to the front and back of the
faucet.
Tighten the screws using a Phillips screwdriver.
Kohler Co.
Shank
3 1071380-2-A