Pairing A Bluetooth Device - Alesis TRANSACTIVE DRUMMER WIRELESS Guia Del Usuario

Pairing a Bluetooth Device

1. Turn on your Bluetooth device.
2. Power on TransActive Drummer Wireless.
3. Press the Pair/Unpair button on TransActive Drummer
Wireless.
Note: You can pair with an iPhone, iPad, computer
(Mac/PC), or Android device equipped with Bluetooth that
supports A2DP. Android users should consider updating their OS if experiencing trouble with pairing or playing
music.
4. Navigate to your Bluetooth device's setup screen, find "Alesis TAD" and connect.
Note: If your Bluetooth device prompts for a pairing code, enter '0000'.
5. TransActive Drummer Wireless's pairing LED will light up solid when it is 'paired'.
Note: If your Bluetooth device is not able to pair to the speaker, press the Pair/Unpair button on the speaker to
break previous Bluetooth connections and reset the Bluetooth module.
6. To disconnect pairing, press the Pair/Unpair button on TransActive Drummer Wireless.
7. To connect to a different Bluetooth device, repeat Steps 4-5.
Note: Maximum range will be achieved when using devices with Bluetooth 4.0.
Troubleshooting
If the sound is distorted: Try lowering the volume control of your sound source or musical instrument. Also, try to
reduce the overall volume of TransActive Drummer Wireless.
If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower the bass level. This
will allow you to play the music louder before clipping (distortion) occurs.
If there is a high-pitched whistling noise when using microphones: This is probably feedback. Point the
microphones away from the speaker.
If you can't hear the microphone over the music volume: Turn down the music volume from your source.
Note: To avoid interruptions during playback,
we recommend putting your Bluetooth device
in Airplane Mode and deactivating any alarms
or alerts before activating Bluetooth.
5