Alto Professional PRESENTER PA Guia Del Usuario página 4

Features
Rear Panel
1. Battery Level/Charging Indicator: While the unit is powered on, these four lights indicate
the power left in the battery. Battery life varies based on volume and usage. The Charging
Indicator illuminates red when the battery is charging and green when it is fully charged.
The LED will turn off when the battery is full and the unit is in standby.
2. Mic Volume: Turn this knob to adjust the volume of the microphone.
3. Aux/Bluetooth Volume: Turn this knob to adjust the input volume of the aux input and
Bluetooth. When the knob is at the minimum position, the internal speaker will be muted.
4. Aux Input (1/8" / 3.5 mm): Connect a CD player, digital media player, or other audio
source to this 1/8" (3.5 mm) stereo auxiliary input. Control the volume using the
Aux/Bluetooth Volume knob.
5. Bluetooth Pair Button: Press this button to pair a Bluetooth device. When Presenter PA is in
pairing mode, the LED above this button will flash quickly. On your Bluetooth device's setup
screen, find Presenter PA and connect. When successfully paired, the LED will remain lit.
6. USB Charging Port: Connect your device's charge cable here to charge it. USB charging
only functions when the unit's power is turned on.
7. Power Cable Input (IEC): Insert the included power cable here to charge the unit. Note
that the Presenter PA can run off the power cable while it simultaneously charges the
battery. The charge indicator illuminates red when the battery is charging.
4
2 3
1
6
8
7
5
4
10
9