DMM Coron Helmet iD Manual Del Usuario página 5

INSTRUCTIONS/ ISTRUZIONI
Field of application
climbing, rock climbing. The chin strap has a 50
daN resistance.
Instructions for use
This product is part of personal safety
equipment. Read the above documentation
carefully before using the product. Be careful
to read and observe the following instructions
for mountain climbing, climbing and it does
not exempt the user from personal liability
for the related risks. Activities carried out at
heights (either sports or industrial) involve
serious risks and danger for the head. Injuries
cannot be ruled out completely. In order to
guarantee the highest level of safety during
such activities, it is necessary to use equipment
in compliance with the current regulations and
to use it properly. The following instructions for
use are important in order to ensure correct
use. However, they cannot replace experience,
personal liability and awareness of individual
users concerning the risks related to climbing,
mountain climbing, such instructions do not
exempt from personal liability due to the
related risks. Use is only permitted to trained
and skilled people or under the supervision
of an expert. The producer denies liability for
improper and/or incorrect use of the product.
GB
Liability and risk rest entirely with the user. In
the case of use in rescue or PPE operations,
it is highly recommended to observe national
regulations on the matter.
Adjustment
In order to assure a safe protection, this
the head properly so that it does not rock side to
side or move when the chin strap is locked and
the slider is in the correct position based on the
highest level of protection if this adjustment is
done correctly. A perfect and safe adjustment
on the head is guaranteed only if the chin strap
is locked and tightened and with a correct
adjustment to the cranial perimeter. The straps
must not cover the ears and the buckle must not
touch the chin. The locked chin strap must not
exert pressure on the larynx. The helmet must
be adjusted on the head always in a horizontal
position so that it protects the forehead as well.
1. wear the helmet with the back size adjust
system open
2. lock the size adjust system by rotating the
back wheel
3. lock the chin strap buckle. A locking "click"
must be heard. Tighten the strap so that the
buckle is properly locked
4. adjust the chin strap
5