Specifications - Sony BRAVIA OLED KD-65AG8 Guía De Referencia

The screen becomes darker while watching
TV.

If the whole image or part of the image remains
still, the screen brightness will be gradually
reduced to prevent image retention. This is not a
malfunction of the TV.
You are concerned about image retention.
If the same image is displayed repeatedly or for
long periods of time, image retention may
occur. To reduce image retention, we
recommend that you turn off the TV normally by
pressing the power button on the remote
control or the TV.
Note
• Perform Panel refresh manually only when image
retention is particularly noticeable. As a reference,
perform it only once a year. Avoid performing it more
than once a year because it may affect the usable life
of the panel.
• Images that include clocks, logos and bright colours
(including white) easily cause image retention. Avoid
displaying these types of images for long periods of
time, otherwise image retention may occur.
A white line appears on the screen.

Panel refresh automatically runs after the TV has
been used for long periods of time to reduce
image retention. Panel refresh starts after the TV
is turned off and takes about one hour to
complete. A white line may be displayed on the
screen during the Panel refresh. This is not a
malfunction of the TV.
The message [Panel refresh did not finish...] is
displayed.
Panel refresh automatically runs after the TV has
been used for long periods of time to reduce
image retention. If the TV is turned on, the
mains lead is unplugged, or the room
temperature falls outside of the range between
10 ºC and 40 ºC during the Panel refresh, the
process will not be completed and this message
will appear.

If Panel refresh started automatically, it will restart
when you turn off the TV with the remote control.

If Panel refresh initiated manually, you must
select it again.

Specifications

System
Panel system
OLED (Organic Light Emitting Diode) Panel
TV system
Depending on your country/area selection/TV model
Analogue: B/G, D/K, I
Digital: DVB-T/DVB-C
1
DVB-T2*
1
Satellite* : DVB-S/DVB-S2
Colour system
PAL/SECAM/NTSC3.58 (Video only)/NTSC4.43 (Video only)
Channel coverage
Depending on your country/area selection/TV model
Analogue: UHF/VHF/Cable
Digital: UHF/VHF/Cable
1
Satellite* : IF Frequency 950-2,150 MHz
Sound output
10 W + 10 W + 10 W + 10 W
Wireless technology
Protocol IEEE802.11ac/a/b/g/n
(IEEE802.11ac may not be available depending on countries/
regions.)
Bluetooth Version 4.1
Frequency band(s)
Wireless LAN (IEEE802.11ac/a/b/g/n)
Frequency range
2400 - 2483.5 MHz
5150 - 5250 MHz
5250 - 5350 MHz
5470 - 5725 MHz
5725 - 5850 MHz
Bluetooth
Frequency range
2400 - 2483.5 MHz
RMF-TX220E
Bluetooth
Frequency range
2400 - 2483.5 MHz
Software version
This radio equipment is intended to be used with the approved
version(s) of software that are indicated in the EU Declaration of
Conformity.
Press HELP on the remote control to know the software version.
Remote control: _._.__.___
Press HOME, then select [Settings]  [Voice Remote Control]
 [Software version].
The software loaded on this radio equipment is verified to
comply with the essential requirements of the Directive 2014/
53/EU.
Input/Output jacks
Antenna (aerial)/cable
75 ohm external terminal for VHF/UHF
1
Satellite antenna*
Female F Type Connector, 75 ohm.
DiSEqC 1.0, LNB 13 V/18 V & 22 kHz tone, Single Cable
Distribution EN50494.
/ AV IN
Video/Audio input (mini jack)
GB
Output Power
< 20.0 dBm
< 23.0 dBm
< 20.0 dBm
< 20.0 dBm
< 13.9 dBm
Output Power
< 10.0 dBm
Output Power
< 10.0 dBm
13
GB