Kobalt 50 PIECE AIR TOOL KIT Manual Del Usuario página 9

3/8 IN. AIR RATCHET WRENCH
1. Remove the air inlet protective cap. (See Figure 1)
2. Mount the male plug by hand into the air inlet. (See Figure 2)
3. Place 2-3 drops of air tool oil into the male plug before each use.
(See Figure 3)
4. Mount the 3/8 in. to 1/2 in. adapter onto the ratchet wrench anvil and then
choose the correct impact socket as needed and mount it onto the adapter.
(See Figure 4)
Only use impact sockets that have an RPM rating equal to
WARNING
or greater than the tool itself.
5. Connect air supply hose to tool. Set the air pressure at 90 PSI.
(See Figure 5)
:
9
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5