Technical Data; Emissions; Scope Of Supply; Use According To Intended Purpose - Mafell FM 800 Traducción Del Manual De Instrucciones Original

2.3 Technical data

Universal motor, radio and TV interference
suppressed
Power input (nominal load)
Current at nominal load
Idling speed
Tool holding fixture with collet ø
Tool shank maximum
Tool shank minimum
Milling cutter Ø, maximum
Abrasive wheel Ø, maximum
Weight without mains cable
Dimensions (W x L x H)

2.4 Emissions

The values stated are emission levels. Although there is a correlation between emission and imission level, it
cannot be reliably derived from this whether additional precautions are necessary. Factors influencing the
current immission level existing at the workplace comprise the duration of exposure, the room characteristic,
other sources of noise, etc. such as e.g. the number of machines and other adjacent machining operations. In
addition, the permissible immission level may differ from country to country. This information is nevertheless
suitable for providing the machine user with an improved assessment of the hazard and risk.
2.4.1 Noise emission specifications
Noise emission values determined according to EN 60745:
Sound pressure level
Uncertainty
Sound power level
Uncertainty
The noise measurement was done without tool at idling speed.

2.5 Scope of supply

Milling motor FM 800 / FM 1000 complete with:
1 collet Ø 6 mm
1 open-ended spanner AF 17
1 operating manual
1 folder "Safety instructions"

2.6 Use according to intended purpose

The milling motor is intended for permanent
installation in guiding machining systems with ø 43
mm clamping collar. Tools are selected depending on
the materials to be processed and the capacity of the
feed drives.
FM 800 FM 800
230 V~,
120 V~,
50 Hz
60 Hz
800 W
4,0 A
7,5 A
7.000 – 25.000 rpm
6 mm (0.24 in.)
8 mm
3 mm (0,12 in.)
36 mm
40 mm
1.6 kg (3.53 lbs)
73 x 254 x 79 mm (2.87 x 10 x 3.11 in.)
L = 75 dB (A)
PA
K = 3 dB (A)
PA
L = 86 dB (A)
PA
K = 3 dB (A)
PA
Please take into account the milling motor capacity at
maximum tool diameter and anticipated machining
depth.
We exclude the use as hand-guided power tool.
-14-
FM 1000 FM 1000
230 V~, 120 V~,
50 Hz 60 Hz
1000 W
4,6 A 8,3 A
4.000 – 25.000 rpm