Assemble The High Chair; Using The Restraint System; Folding The High Chair - Evenflo Compact Fold Manual De Instrucciones

ASSEMBLE THE HIGH CHAIR

3
A
C
4
E
E
D
C
2
Install the front leg assembly to the high chair seat
C
Make sure the front leg assembly locks into the high chair with
audible clicks on each side. Pull on the front leg assembly
make sure it is attached securely.
To install the tray D , place one foot on the front leg
assembly (for stability) and align the slots beneath the tray with
C
the armrests E on the high chair.
Squeeze the tray locks beneath the tray and slide it into one of
three positions on the high chair armrests.
Tug on the tray to make sure it is locked into place.
To remove the tray , squeeze the tray locks and remove from the
D
high chair.
3-pt Restraint
.
A
A
to
C
B
5-pt Restraint
A
B
To prevent finger injury in hinge areas, take care when folding or unfolding the high chair.
B
To fold the high chair, press downward on the seat lock
Continue pulling the seat back
• The child MUST be secured in the high chair at all times by the
restraining system. The tray is not designed to hold the child in the chair.
• NEVER leave child unattended.
• The high chair is ONLY for use with children who are capable of sitting
upright unassisted (approximately 6 months old).
C
Release all buckles A on the restraint.
Place the baby in the seat and bring the crotch strap
child's legs.
Fasten each buckle and pull the straps to tighten the waist restraint
(shoulder restraints only for 5-pt) for a snug fit.
Note: To loosen straps, push in the release button
pull upward.
C
WARNING
A
while pulling the seat back
A
B backward while lifting the chair lock C upward until the high chair begins to fold.

USING THE RESTRAINT SYSTEM

WARNING
up between the
B
C on the buckle and

FOLDING THE HIGH CHAIR

B
C
backward.
B
3