Before Use; Operation - Garland ARM 450 Manual De Instrucciones

English

4. BEFORE USE

WARNING! Do not open or take apart the support
arm! If you have any questions about the functioning
of the support arm, take it to your nearest after-sales
service.
Before using the support arm, you must always
perform the following checks:
1. Check that no screws are loose.
2. Check that there are no cracks or defects in the
attachment points.
3. That the cable and hook chain are securely
attached to the support arm.
4. Check that the rest of the attachment has no
cracks or breaks.
5. Check that the knob tightens correctly.

5. OPERATION

5.1. ADJUSTING THE TENSION
5.1.1. SPECIAL POINTS BEFORE ADJUSTING THE
TENSION
1. Always press the lever to release the black knob
before turning the knob.
2. Adjust the tension of the cable always without
weight on the attachment. The cable must always
be within its protective cover. This will prevent
any sudden or abrupt movement of the cord and it
causing damage to the user and people
surrounding.
If the cable is unwound out of its cover, reduce the
tension and wind the cord to its proper position.
Press the lever 1 cm to the right and turn the knob
counterclockwise.
10/16
Knob
Lever