Connect Gas Supply - Weber Summit 89796 Guia Del Propietario

8
Use of any other hose and regulator assembly could be
dangerous, and may not provide adequate gas supply to
®
the Summit Built-In gas grill, and could result in a fire or
an explosion causing serious bodily injury or death, and
damage to property.
Failure to use the Summit
cylinder or failure to build a LP cylinder enclosure for a 20 lb
cylinder following the requirements for ventilation, cylinder
retention and separation of the LP cylinder from a heat
source, listed in the ANSI Standard for Outdoor Cooking Gas
Appliances, ANSI Z21.58 CSA 1.6, could be dangerous, and
could result in a fire or an explosion causing serious bodily
injury or death and damage to property.
If you do not follow the DANGER statements exactly, the Warranty on the Summit
gas grill will be voided.
SIDE BURNER LP SUPPLY CONNECTIONS
1
Corrugated Gas Line to Manifold
2
Plug unused hole with supplied plug
3
Use bushing for gas line hole
4
1/2" (12.7mm) Flared Gasket
5
6
Cap (Optional Side Burner)
7
8
a Top of Box
b Back of Box
c Side View
GAS INSTRUCTIONS
DANGER
DANGER
®
Built-In Tank Cabinet for a 20 lb
90° Fitting
To SIde Burner
Connection to LP Tank

CONNECT GAS SUPPLY

1) Uncap the flare fitting from the optional side burner connection located inside the
®
Summit Built-In Tank Cabinet (#21280).
Note: We strongly recommend that you use the Summit
for installations using a 20 lb LP cylinder, mounted remotely in an "island" structure.
If your, licensed contractor or licensed plumber, builds an LP cylinder enclosure
following the guidelines in the ANSI Standard for Outdoor Cooking Gas Appliances,
Z21.58 CSA 1.6, you need to order kit number (#21287).
2) Connect the corrugated gas line to the side burner Connection.
®
Built-In
2
b.
2
b.
®
Built-In Tank Cabinet (#21280)
a.
1
5
4
3
6
c.
a.
5
7
c.
WWW.WEBER.COM
8
®