Festool RS 300 EQ Instrucciones De Servicio/Lista De Piezas De Repuesto página 10

7.2 Abrasives to clamp
Festool offers perforated abrasives
to clamp.
Unperforated abrasives can be perforated
with the „Lochfi x" (accessory).
Secure an abrasive sheet in place using
the two clamping devices (1.12). Press the
levers to release the clamping devices.
Once clamped in position, make sure
the abrasive paper is taut and sits
fl at on the sanding pad.
8 lnstructions on application
Never overload the tool by using too much
pressure! The best sanding results are
achieved when applying moderate pressu-
re. The sanding performance and quality
depend mainly on the choice of the right
sanding material. Festool offers the appro-
priate accessories, sanding and polishing
attachments for every application.
The accessory and tool order number can
be found in the Festool catalogue or on the
Internet under "www.festool.com".
We recommend the following settings
on the rotary control (2.1) for electro-
nic machines:
rotary control setting
- sanding work
5 - 6
- sanding with max. drive
- sanding old paint
- sanding wood and veneer prior to pain-
ting
- interim sanding of paint on surfaces
4 - 5
- sanding of thinly applied primer
- sanding of wood with sanding vlies
- sanding edges on wooden parts
- smoothing primed wooden surfaces.
3 - 4
- sanding full wooden and veneer edges
- sanding in the grooves/rebates of windows
and doors
- interim paint sanding on edges
- pre-sanding natural wood windows with
sanding vlies
- smoothing wood surfaces with sanding felt
prior to staining
- rubbing down stained surfaces with san-
ding vlies
- rubbing down or removing excess lime
paste with sanding vlies
2 - 3
- interim paint sanding on stained sur-
faces
- cleaning natural wood window grooves
with sanding felt
1 - 2
- sanding stained edges
- sanding thermoplastic synthetics
9 Maintenance and care
Always remove the power supply
plug from the socket before carrying
out any work on the machine.
The cool air openings in the motor casing
must always be kept clean and unobstruc-
ted to ensure air circulation.
All maintenance and repair work which
requires the motor casing to be opened
may only be carried out by an authorised
service centre.
10 Warranty
Our equipment is under warranty for at
least 12 months with regard to material or
production faults in accordance with nati-
onal legislation. In the EU countries, the
warranty period for exclusively private use
is 24 months (an invoice or delivery note
is required as proof of purchase).
Damage resulting from, in particular, nor-
mal wear and tear, overloading, improper
handling, or caused by the user or other
damage caused by not following the opera-
ting instructions, or any fault acknowledged
at the time of purchase, is not covered by
the warranty. Complaints will only be ack-
nowledged if the equipment has not been
dismantled before being sent back to the
suppliers or to an authorised Festool cus-
tomer support workshop.
Store the operating instructions, safety no-
tes, spare parts list and proof of purchase in
a safe place. In addition, the manufacturer's
current warranty conditions apply.
Note
We reserve the right to make changes to
the technical data contained in this infor-
mation as a result of ongoing research and
development work.
10