Mitsubishi Electric PAR-FL31MA Libro De Instrucciones página 13

Program Operation
™ Program operation can be used by carrying out Start Timer Setting and Stop Timer Setting one
after the other.
™ In cases where the pre-set times for Stop Timer and Start Timer are the same, program operation
can be used by pressing the STOP and START (TIMER SET) buttons one after the other.
™ The timers will come into effect in the order of the pre-set times.
(The "↑" and "↓" indicate the order in which Start Timer and Stop Timer are activated.)
e.g. 1) When current time is 8:00 pm:
To make the air-conditioner stop at 11:00 pm
and start at 6:00 am the following morning.
1
ON
AM
PM
AM
PM
8
Note:
™ Timer times can be set in steps of ten minutes.
™ If the POWER ON/OFF button is pressed during timer operation, the timers will be canceled.
™ If the air conditioner is turned On or Off after the timer operation ends, the operation mode will
switch automatically back to continuous operation mode. The air-conditioner will start in the
continuous mode when it is turned on next time.
ON
OFF
11
6
e.g. 2) When current time is 11:00 am:
To make the air-conditioner start at 5:00 pm
and stop at 9:00 am the following morning.
1
AM
PM
OFF
AM
PM
11
ON
OFF
9
5
13