Tabla de contenido
Publicidad
5 Ejemplo: Recopilación de datos de diferentes dispositivos
2.
Ir a "Log file settings", seleccionar "Add new", y realizar los siguientes ajustes:
3.
En "Data point settings", seleccionar "Add new", y realizar los siguientes ajustes:
4.
Ir a "Log file settings", seleccionar "Add new", y realizar los siguientes ajustes:
5.
En "Data point settings", seleccionar "Add new", y realizar los siguientes ajustes:
Con esta configuración, se realiza el histórico de un solo dato. Para realizar el histórico de
varios datos, se recomienda importar las variables desde un archivo CSV.
40
"Delete renamed files": Deshabilitado
"Write midnight value to previous day": Deshabilitado
"Data storage location": "Internal memory"
"CSV file header": "3 rows"
"CSV file separator": "," (coma)
"CSV decimal separator": "." (punto)
"Enable PLC memory area, start address": Deshabilitado
"Enable PLC flags": Deshabilitado
"File name (max. 30 characters)": KW9M_RS485_1
"File splitting": "File per day"
"COM interface/station number": RS485/232, 1
"Trigger type": "Fixed cycle"
"Trigger cycle time (s)": 300 (se almacena un nuevo valor cada 5min)
"Save cache to file flag": Deshabilitado
"Log records in cache": 0
"Max. number of files before auto-delete": 0
"Data point name (max. 30 characters)": Energy
"Unit (max. 7 characters)": kWh
"COM interface/station number": RS485/232, 1
"Register type/address": "Momentary value", DT106
"Data format": "UDINT (32 bits, unsigned)", "2 decimal", "Little Endian"
"Apply Scaling": Deshabilitado
"File name (max. 30 characters)": KW9M_RS485_2
"File splitting": "File per day"
"COM interface/station number": RS485/232, 1
"Trigger type": "Fixed cycle"
"Trigger cycle time (s)": 300 (se almacena un nuevo valor cada 5min)
"Save cache to file flag": Deshabilitado
"Log records in cache": 0
"Max. number of files before auto-delete": 0
"Data point name (max. 30 characters)": Energy
"Unit (max. 7 characters)": kWh
"COM interface/station number": RS485/232, 2
"Register type/address": "Momentary value", DT106
"Data format": "UDINT (32 bits, unsigned)", "2 decimal", "Little Endian"
"Apply Scaling": Deshabilitado
FP-I4C
Publicidad
Tabla de contenido
