2. Slide the juicer container over the drive shaft of the motor base, making
sure the container locks in position by turning it clockwise.
3. Place the strainer on the container.
4. Place the small cone over the drive shaft.
5. Plug the appliance in the mains socket.
6. Cut the fruit to be squeezed in half.
7. Press each half firmly over the small cone or large cone and the appliance
will operate automatically.
NOTE: When the large cone is used it shall fit over the small cone.
8. The juice will pass through the strainer and then flow into the juice
container.
Short-time operation
The appliance is designed to process average domestic quantities of citrus
fruits; it can be operated as below:
max. 15 seconds on and 15 seconds off as a cycle, and max. 10 cycles is
allowed.
After that, please allow it to cool down to room temperature before continuing
again.
CLEANING AND CARE
Make sure the juicer is switched off and unplugged before cleaning.
Disassemble the appliance and wash all removable parts in warm, soapy
water. Rinse them thoroughly.
Wipe the motor base with a damp cloth. Do not use abrasive cleaners as
they may damage the surface.
Do not immerse the motor base in water or any other liquid.
Surfaces in contact with food should be cleaned regularly to avoid cross
contamination from different types of food, the use of hot clean water with a
All manuals and user guides at all-guides.com
4