Service And Support - AEG ABH-26L Manual Del Operador

APPLICATIONS
Drilling in Wood, Composition Materials and
Plastic
When drilling in wood, composition materials and
plastic, select the drill operating mode. Start the drill
slowly, gradually increasing speed as you drill. Select
low speeds for plastics with a low melting point.
Drilling in Metal
When drilling in metal, select the drill operating mode.
Use high speed steel twist drills or hole saws. Use a
center punch to start the hole. Lubricate drill bits with
cutting oil when drilling in iron or steel. Use a coolant
when drilling in nonferrous metals such as copper,
brass or aluminum. Back the material to prevent
binding and distortion on breakthrough.
Drilling in Masonry
When drilling in masonry, select the rotary hammer
operating mode. Use high speed carbide-tipped
bits. Drilling soft masonry materials such as cinder
block requires little pressure. Hard materials like
concrete require more pressure. A smooth, even
fl ow of dust indicates the proper drilling rate. Do not
let the bit spin in the hole without cutting. Do not use
water to settle dust or to cool bit. Do not attempt to
drill through steel reinforcing rods. Both actions will
damage the carbide.
6
All manuals and user guides at all-guides.com
MAINTENANCE
WARNING
To reduce the risk of injury,
always unplug your tool before performing any
maintenance. Never disassemble the tool or try
to do any rewiring on the tool's electrical system.
Contact a service facility for ALL repairs.
Maintaining Tools
Keep your tool in good repair by adopting a regular
maintenance program. Before use, examine the gen-
eral condition of your tool. Inspect guards, switches,
tool cord set and extension cord for damage. Check
for loose screws, misalignment, binding of moving
parts, improper mounting, broken parts and any
other condition that may affect its safe operation.
If abnormal noise or vibration occurs, turn the tool
off immediately and have the problem corrected
before further use. Do not use a damaged tool. Tag
damaged tools "DO NOT USE" until repaired (see
"Repairs").
Under normal conditions, relubrication is not neces-
sary until the motor brushes need to be replaced. Af-
ter six months to one year, depending on use, return
your tool to a service facility for the following:
• Lubrication
• Brush inspection and replacement
• Mechanical inspection and cleaning (gears,
spindles, bearings, housing, etc.)
• Electrical inspection (switch, cord, armature,
etc.)
• Testing to assure proper mechanical and electrical
operation
WARNING
To reduce the risk of injury,
electric shock and damage to the tool, never
immerse your tool in liquid or allow a liquid to
fl ow inside the tool.
Cleaning
Clean dust and debris from vents. Keep the tool
handles clean, dry and free of oil or grease. Use only
mild soap and a damp cloth to clean your tool since
certain cleaning agents and solvents are harmful to
plastics and other insulated parts. Some of these
include: gasoline, turpentine, lacquer thinner, paint
thinner, chlorinated cleaning solvents, ammonia
and household detergents containing ammonia.
Never use flammable or combustible solvents
around tools.
Repairs
If your tool is damaged, return the entire tool to the
nearest service center.
ACCESSORIES
WARNING
To reduce the risk of in-
jury, always unplug the tool before attaching
or removing accessories. Use only specifi cally
recommended accessories. Others may be haz-
ardous.

SERVICE AND SUPPORT

If you encounter any problems with the operation
of this tool, or you would like to locate the service
location nearest you :
www.aeg-pt.com
Visit
Navigate to 'English USA', then 'Service & Warranty'
and follow the directions on the site.
1 (855) AEGTOOL
Call (1 855 234 8665)
Monday-Friday, 7:00 AM - 6:30 PM CST
Our customer service can help answer technical
questions, service and repair inquiries, and war-
ranty issues.
LIMITED WARRANTY
Every AEG power tool is warranted to the original purchaser
only to be free from defects in material and workmanship.
Subject to certain exceptions, AEG will repair or replace any part
on an AEG power tool which, after examination, is determined
by AEG to be defective in material or workmanship for a period
of one (1) year after the date of purchase. Return of the power
tool to an AEG Authorized Service Station, freight prepaid and
insured, is required. A copy of the proof of purchase should
be included with the return product. This warranty does not
apply to damage that AEG determines to be from repairs made
or attempted by anyone other than AEG authorized person-
nel, misuse, alterations, abuse, normal wear and tear, lack of
maintenance, or accidents.
Warranty Registration is not necessary to obtain the applicable
warranty on an AEG power tool product. The manufacturing
date of the product will be used to determine the warranty
period if no proof of purchase is provided at the time warranty
service is requested.
ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACE-
MENT REMEDIES DESCRIBED HEREIN IS A CONDITION
OF THE CONTRACT FOR THE PURCHASE OF EVERY AEG
PRODUCT. IF YOU DO NOT AGREE TO THIS CONDITION,
YOU SHOULD NOT PURCHASE THE PRODUCT. IN NO
EVENT SHALL AEG BE LIABLE FOR ANY INCIDENTAL,
SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR
FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES
OR DELAYS ALLEGED TO BE AS A CONSEQUENCE OF ANY
DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT
INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS
OF PROFITS. SOME STATES DO NOT ALLOW THE EXCLU-
SION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION
MAY NOT APPLY TO YOU. THIS WARRANTY IS EXCLUSIVE
AND IN LIEU OF ALL OTHER EXPRESS WARRANTIES,
WRITTEN OR ORAL. TO THE EXTENT PERMITTED BY LAW,
AEG DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING
WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MER-
CHANTABILITY OR FITNESS FOR A PARTICULAR USE OR
PURPOSE; TO THE EXTENT SUCH DISCLAIMER IS NOT
PERMITTED BY LAW, SUCH IMPLIED WARRANTIES ARE
LIMITED TO THE DURATION OF THE APPLICABLE EXPRESS
WARRANTY AS DESCRIBED ABOVE. SOME STATES DO
NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT
APPLY TO YOU, THIS WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS
WHICH VARY FROM STATE TO STATE.
This warranty applies to product sold in the U.S.A. and Canada
only.
7