Setting The Clock - AEG FU 4002P Instrucciones De Servicio

English
54
WARNING:
• Do not expose the batteries to intense heat, such as sunlight, fire or similar. Danger
of explosion!
• Keep batteries out of the reach of children. They are not toys.
• Do not force batteries open.
• Avoid contact with metallic objects. (Rings, nails, screws etc.) Danger of short
circuits!
• Short circuits may overheat or even ignite batteries. This may lead to combustion.
• When transporting the batteries, cover the terminals for your safety with an adhesive
strip.
• If a battery leaks, do not rub the fluid into the eyes or the skin. If acid comes into
contact with the eyes, rinse with purified water and seek medical advice if symptoms
persist.
CAUTION:
• Different battery types or new and used batteries may not be used together.
• Please bring used batteries to competent collection centers or back to the dealer.
NOTE:
• If the " " symbol is shown on the display, the batteries need to be replaced.
Temperature display
The unit detects the current ambient temperature and shows it on the display.
• Press the DOWN button to toggle the temperature display between °C (degrees
Celsius) and °F (degrees Fahrenheit).

Setting the Clock

Automatic
• After you have inserted the batteries, the time data are automatically received from the
DCF77 station after a few minutes. The unit searches for a signal whilst the " " symbol
is flashing. If a radio signal has been found, the " " symbol lights up. The correct time
appears on the display.
• The time is automatically adjusted on the hour by the station signal.
All manuals and user guides at all-guides.com